Bince N90 GPS RTK GNSS System Base + Rover (Built-in UHF Radio/4G) Surveying Set Novatel OEM729 Main Board
$17,720.00
In StockIn StockOut of stockBince N90 GPS RTK GNSS System Base + Rover (Built-in UHF Radio/4G) Surveying Set Please contact us if you need more details about N90 GPS RTK GNSS System.Key Feature N90 with its Novatel OEM729 main... Read more
Guaranteed Safe Checkout
Bince N90 GPS RTK GNSS System Base + Rover (Built-in UHF Radio/4G) Surveying Set
Key Feature
-
N90 with its Novatel OEM729 main board and 555 channels, provides an excellent real-time navigation solution with high accuracy. All GNSS signals are included, no additional cost
-
Featuring a new, high accuracy multi constellation-antenna, a powerful UHF transmitter and the 4G fits various networks and protocols
-
When the pole is tilted in 30 degrees, N90 still could get the right point data by the automatic calculation and correction system under the tilt survey mode
-
The dual slot for two Smart hot-swappable batteries so no need to power off to replace the battery
-
Applies WIFI connection to realize Web UI control designed to manage, monitor the setting of the receiver and download data using laptop or PC, smartphone or tablet
-
Bundled Android field software SurPad brings a big change in user experience and accessibility
BINCE N90 GNSS RECEIVER
|
GNSS ENGINE |
|
|
CHANNELS |
555 |
|
SATELLITE TRACKED |
GPS: L1CA/L1C/L2C/L2P/L5 |
|
GLONASS: L1CA/L2C/L2P/L3/L5 |
|
|
BeiDou: B1/B2/B3 |
|
|
Galileo: E1/E5/AltBOC/E5a/E5b/E6 |
|
|
IRNSS5: L5 |
|
|
SBAS: L1/L5 |
|
|
QZSS: L1CA/L1C/ L2C/L5/L6 |
|
|
DATA RATE |
MAXIMUM 100Hz |
|
PERFORMANCE |
|
|
POST PROCESSING ACCURACY (RMS) |
|
|
Horizontal |
2.5mm(0.008ft) + 0.5ppm |
|
Vertical |
5mm(0.016ft) + 0.5ppm |
|
REAL-TIME KINEMATIC POSITION (RMS) |
|
|
Horizontal |
8mm(0.03ft) + 0.5ppm |
|
Vertical |
15mm(0.05ft) + 0.5ppm |
|
RTK Initialization Time |
<10s |
|
Hot Start |
<19s (typical) |
|
RTK Initialization Reliability |
>99.99% |
|
Antenna |
Built-In Antenna Integrating GNSS, Bluetooth, WLAN and 4G Modules |
|
Electronic Bubble |
Yes |
|
Smart Battery |
Dual Slot for Two Smart Hot-swappable Batteries |
|
Tilt Survey Sensor |
Automatic Correct in 30 Degrees |
|
Internal Memory |
8GB Standard |
|
TF Card |
Supports TF Cards Expansion Slot Up to 32GB |
|
Internal Radio |
|
|
Transceiver Module |
Built-in Radio Transceiver Module |
|
Power |
0.5/2W (Low/High Power Adjustable) |
|
Operating Range |
≥5km (High Power) (typical) |
|
Frequency Range |
410-470MHz |
|
Protocol |
PCC-EOT, TrimTalk 450S, TrimMark III, South, GeoTalk, GeoMark |
|
Internal Modem |
|
|
Type |
4G LTE (Fits various networks) |
|
Module |
EC20 Multi-mode LTE Module |
|
Frequency Band |
GSM/GPRS/LTE/UMTS/WCDMA |
|
Communication |
|
|
System |
Based on Linux |
|
Bluetooth |
2.1+ EDR Class 2 |
|
WIFI |
IEEE 802.11 b/g/n WLAN |
|
Web UI |
To Upgrade the Software, Manage the Status and Settings, Data Download, etc. Via Smartphone, Tablet or Other Internet Enabled Electronic Devices |
|
Data Security |
When Measuring, the Data is Stored in Three Places for Backup |
|
Reference Output |
RTCM2.3, RTCM3.X, RTCM3.2, CMR, CMR+, RTCA, NOVATELX |
|
Field Software Support |
SurvPad (Android), MicroSurvey FieldGenius or Carlson SurvCE, etc. |
|
I/O Connectors |
|
|
TNC Port |
Connecting Built-in Radio Antenna |
|
5-pin Lemo Port |
Connecting External Power Supply and External Radio |
|
7-pin Lemo Port (USB + serial port) |
Connecting PC and Handheld |
|
Dimensions |
156mm x 76mm |
|
Bottom Cover |
Aluminium Magnesium Alloy |
|
Power |
2 Rechargeable and Replaceable 7.4V 3400mAH Intelligent Lithium Batteries |
|
Battery Slot |
Dual Slot for Two Smart Hot Swappable Lithium Batteries with Power Level Indicator (No Need to Power Off to Replace the Battery) |
|
Working Time |
> 8 Hours |
|
Environmental |
|
|
Operating Temperature |
-30℃ to +60℃ |
|
Storage Temperature |
-40℃ to +80℃ |
|
Humidity |
100% Condensing |
|
Waterproof |
IP68 |
|
Shock Resistance |
2m (6.56ft) Pole Drop, 1.2m (3.94ft) Free Drop |
HC2 GNSS CONTROLLER
|
System |
|
|
System |
Android 7.1 |
|
Processor |
Quad-Core ARM Cortex-A7 Processor, up to 1.1GHz |
|
RAM |
1GB DDR3 |
|
Internal Memory |
8GB |
|
Display |
|
|
Screen |
4.3 inches Blanview TFT Transflective Touch Screen |
|
Resolution |
480 x 800 VGA |
|
Camera |
|
|
Rear |
8MP |
|
Communication |
|
|
Bluetooth |
2.1+ EDR |
|
WIFI |
802.11b/g/n WLAN |
|
I/O Connectors |
USB Type C |
|
Keypad |
Physical Backlit Buttons |
|
Internal Modem Band |
2G: GSM/GPRS/EDGE/CDMA95 |
|
3G: TD-SCDMA/WCDMA/EVDO |
|
|
4G: TDD-LTE/FDD-LTE |
|
Physical |
|
|
Dimensions |
192mm x 93mm x 42mm |
|
Weight |
598g Including Battery |
|
Power |
1 Rechargeable and Replaceable 7.4V 3400mAH Intelligent Lithium Batteries |
|
Battery Slot |
Same as the GNSS Receiver Battery Model |
|
Single-battery Life |
> 20 Hours |
|
Recharge Time |
4 Hours |
|
Operating Temperature |
-30℃ to +65℃ |
|
Storage Temperature |
-40℃ to +80℃ |
|
Humidity |
5%-95%RH Non-condensing |
|
Waterproof |
IP67 |
|
Shock Resistance |
1.2m (3.94ft) Free Drop |
SurPad 4.0 Professional Field Survey Software (Android)
Click Here to download the user manual for SurPad 4.0.
-
New CAD Graphic Drawing functions. You cancollect points to line easily in the field. SurPad 4.0 also supports Layersprocession function, input/export DXF, SHP file.
-
Predefined with multiple countries 1600coordinate system, projection mode, units and file encode scheme. Thecoordinated system can be transmitted through a QR code.
-
Available in multiple languages andcompatible with different Android devices.
-
Support Geoid and Grid file import and RTCM 1021-1027 data analysis.
-
Equipped with professional road design andstake out function, SurPad 4.0 can solve complex road data easily.
BINCE N90 GNSS RTK BASE+ROVER PACKING LIST
|
Packing List |
|
|
N90 GNSS Receiver |
x2 |
|
Whip Antenna |
x2 |
|
HC2 Controller |
x1 |
|
SurvPad 4.0 Software (Android) |
x1 |
|
Controller Holder |
x1 |
|
Smart Hot-swappable Lithium Battery |
x5 |
|
Dual Slot Charger |
x2 |
|
Power Adapter |
x3 |
|
USB Type C to USB-A Cable |
x1 |
|
Measuring Tape 3m |
x2 |
|
Connection Plate |
x2 |
|
Screw Thread Connector |
x1 |
| Extension Pole 750px |
x1 |
|
Carbon Fibre Surveyors Pole 2.5m |
x1 |
|
Heavy Duty Wood Tripod |
x1 |
|
Hard Carry Case |
x2 |
Shipping:
- Pick up can be arranged, please contact us
- We will ship your item within one business day of receiving cleared payment
- If you need to make changes to your shipping address, we can only do so if it hasn't left the warehouse
Return/Exchange/Refund
- Refund can only be provided where we are unable to supply the advertised product. We are unable to provide a refund if the customer changes their mind
- The refund will be made in the same way as you originally paid and will be processed against the original credit cardholder details. It may take an additional 3 to 5 business days to process
- We will provide you with an exchange where the items are faulty or damaged due to manufacturing or material defects and we shall pay the postage (to and from) for the return
- Any faulty item or incorrectly supplied item has to be claimed within 7 days from the date of receiving the item
- All return items must be returned in its original condition and original packaging, with the original receipt of purchase
- All return items must be delivered to:* Bince Pty Ltd 23/830 Princes Highway , Springvale VIC 3171
*Bince Pty Ltd recommends sending return parcels via registered post or courier as we are not liable if your return is not received.
Terms & Conditions
- Bince Surveying Equipment warrants its products for a period after the date of purchase. If any defect due to faulty materials and workmanship occurs within this period, Bince Surveying Equipment will repair or replace the product at its expense
- By purchasing the product, the buyer agrees that it is the buyer who is liable to all the public and product liability resulting from the use of the product
- While all care is taken, any errors or omissions in the product description are unintentional
- Items will not be shipped from our warehouse until receiving cleared payment
- We check and test items before shipping. In the unlikely condition that you receive a faulty item, please contact us within 7 business days upon receiving the faulty items
Warranty
We provided a limited warranty for our products and free repair for the product within the warranty period and terms (please refer to the warranty period and terms on the corresponding products on the brochure or website)
- All products from Bince Pty Ltd are under warranty for a period, from the date of purchase (valid proof of is required)
- Any failure or damage resulting from misuse, abuse, unauthorised alterations or repair are not covered. Consumables are not covered
- If the product is proved to be defective in material or workmanship under the cover of this warranty, Bince Pty Ltd will offer to repair or replace at its own discretion. Cost of labour or parts for the repair will be covered
- Customers are required to pay the freight to and from our warehouse or deliver/ pick up the product to our warehouse
- Any cost incurred in the return of goods to Bince Pty Ltd will be paid by the customer
- Bince Pty Ltd reserves the final decision to amend or interpret the warranty terms without further notification
