Bince N90 GPS RTK GNSS System Base + Rover + External 35W Radio Surveying Set
Key Feature
-
N90 with Novatel OEM729 main board and 555 channels, provides an excellent real-time navigation solution with high accuracy. All GNSS signals are included, no additional cost
-
Featuring a new, high accuracy multi constellation-antenna, a powerful UHF transmitter and the 4G fits various networks and protocols
-
When the pole is tilted in 30 degrees, N90 still could get the right point data by the automatic calculation and correction system under the tilt survey mode
-
The dual slot for two Smart hot-swappable batteries so no need to power off to replace the battery
-
Applies WIFI connection to realize Web UI control designed to manage, monitor the setting of the receiver and download data using laptop or PC, smartphone or tablet
-
Bundled Android field software SurPad brings a big change in user experience and accessibility
BINCE N90 GNSS RECEIVER
|
GNSS ENGINE |
|
|
CHANNELS |
555 |
|
SATELLITE TRACKED |
GPS: L1CA/L1C/L2C/L2P/L5 |
|
GLONASS: L1CA/L2C/L2P/L3/L5 |
|
|
BeiDou: B1/B2/B3 |
|
|
Galileo: E1/E5/AltBOC/E5a/E5b/E6 |
|
|
IRNSS5: L5 |
|
|
SBAS: L1/L5 |
|
|
QZSS: L1CA/L1C/ L2C/L5/L6 |
|
|
DATA RATE |
MAXIMUM 100Hz |
|
PERFORMANCE |
|
|
POST PROCESSING ACCURACY (RMS) |
|
|
Horizontal |
2.5mm(0.008ft) + 0.5ppm |
|
Vertical |
5mm(0.016ft) + 0.5ppm |
|
REAL-TIME KINEMATIC POSITION (RMS) |
|
|
Horizontal |
8mm(0.03ft) + 0.5ppm |
|
Vertical |
15mm(0.05ft) + 0.5ppm |
|
RTK Initialization Time |
<10s |
|
Hot Start |
<19s (typical) |
|
RTK Initialization Reliability |
>99.99% |
|
Antenna |
Built-In Antenna Integrating GNSS, Bluetooth, WLAN and 4G Modules |
|
Electronic Bubble |
Yes |
|
Smart Battery |
Dual Slot for Two Smart Hot-swappable Batteries |
|
Tilt Survey Sensor |
Automatic Correct in 30 Degrees |
|
Internal Memory |
8GB Standard |
|
TF Card |
Supports TF Cards Expansion Slot Up to 32GB |
|
Internal Radio |
|
|
Transceiver Module |
Built-in Radio Transceiver Module |
|
Power |
0.5/2W (Low/High Power Adjustable) |
|
Operating Range |
≥5km (High Power) (typical) |
|
Frequency Range |
410-470MHz |
|
Protocol |
PCC-EOT, TrimTalk 450S, TrimMark III, South, GeoTalk, GeoMark |
|
Internal Modem |
|
|
Type |
4G LTE (Fits various networks) |
|
Module |
EC20 Multi-mode LTE Module |
|
Frequency Band |
GSM/GPRS/LTE/UMTS/WCDMA |
|
Communication |
|
|
System |
Based on Linux |
|
Bluetooth |
2.1+ EDR Class 2 |
|
WIFI |
IEEE 802.11 b/g/n WLAN |
|
Web UI |
To Upgrade the Software, Manage the Status and Settings, Data Download, etc. Via Smartphone, Tablet or Other Internet Enabled Electronic Devices |
|
Data Security |
When Measuring, the Data is Stored in Three Places for Backup |
|
Reference Output |
RTCM2.3, RTCM3.X, RTCM3.2, CMR, CMR+, RTCA, NOVATELX |
|
Field Software Support |
SurvPad (Android), MicroSurvey FieldGenius or Carlson SurvCE, etc. |
|
I/O Connectors |
|
|
TNC Port |
Connecting Built-in Radio Antenna |
|
5-pin Lemo Port |
Connecting External Power Supply and External Radio |
|
7-pin Lemo Port (USB + serial port) |
Connecting PC and Handheld |
|
Dimensions |
156mm x 76mm |
|
Bottom Cover |
Aluminium Magnesium Alloy |
|
Power |
2 Rechargeable and Replaceable 7.4V 3400mAH Intelligent Lithium Batteries |
|
Battery Slot |
Dual Slot for Two Smart Hot Swappable Lithium Batteries with Power Level Indicator (No Need to Power Off to Replace the Battery) |
|
Working Time |
> 8 Hours |
|
Environmental |
|
|
Operating Temperature |
-30℃ to +60℃ |
|
Storage Temperature |
-40℃ to +80℃ |
|
Humidity |
100% Condensing |
|
Waterproof |
IP68 |
|
Shock Resistance |
2m (6.56ft) Pole Drop, 1.2m (3.94ft) Free Drop |
TRU35 External Radio
|
TRU35 External Radio |
|
|
Type |
Tx-Rx |
|
Multi-Channel |
16 |
|
Frequency Range |
410-470MHz |
|
Power |
2/35W (Low/High Power Adjustable) |
|
Antenna |
5.5dBi External High-gain Antenna (HGA) with 5m Antenna Feeder Cable |
|
Operating Range |
≥15km (High Power) (typical) |
|
Communication |
Bluetooth Configuration/Bluetooth Data Transmission |
|
Radio Relay Function |
Yes |
|
Protocol |
PCC-EOT, TrimTalk 450S, TrimMark III, South, HiTarget, GeoTalk, GeoMark |
|
Waterproof |
IP67 |
HC2 GNSS CONTROLLER
|
System |
|
|
System |
Android 7.1 |
|
Processor |
Quad-Core ARM Cortex-A7 Processor, up to 1.1GHz |
|
RAM |
1GB DDR3 |
|
Internal Memory |
8GB |
|
Display |
|
|
Screen |
4.3 inches Blanview TFT Transflective Touch Screen |
|
Resolution |
480 x 800 VGA |
|
Camera |
|
|
Rear |
8MP |
|
Communication |
|
|
Bluetooth |
2.1+ EDR |
|
WIFI |
802.11b/g/n WLAN |
|
I/O Connectors |
USB Type C |
|
Keypad |
Physical Backlit Buttons |
|
Internal Modem Band |
2G: GSM/GPRS/EDGE/CDMA95 |
|
3G: TD-SCDMA/WCDMA/EVDO |
|
|
4G: TDD-LTE/FDD-LTE |
|
Physical |
|
|
Dimensions |
192mm x 93mm x 42mm |
|
Weight |
598g Including Battery |
|
Power |
1 Rechargeable and Replaceable 7.4V 3400mAH Intelligent Lithium Batteries |
|
Battery Slot |
Same as the GNSS Receiver Battery Model |
|
Single-battery Life |
> 20 Hours |
|
Recharge Time |
4 Hours |
|
Operating Temperature |
-30℃ to +65℃ |
|
Storage Temperature |
-40℃ to +80℃ |
|
Humidity |
5%-95%RH Non-condensing |
|
Waterproof |
IP67 |
|
Shock Resistance |
1.2m (3.94ft) Free Drop |
SurPad 4.0 Professional Field Survey Software (Android)
Click Here to download the user manual for SurPad 4.0.
-
New CAD Graphic Drawing functions. You cancollect points to line easily in the field. SurPad 4.0 also supports Layersprocession function, input/export DXF, SHP file.
-
Predefined with multiple countries 1600coordinate system, projection mode, units and file encode scheme. Thecoordinated system can be transmitted through a QR code.
-
Available in multiple languages andcompatible with different Android devices.
-
Support Geoid and Grid file import and RTCM 1021-1027 data analysis.
-
Equipped with professional road design andstake out function, SurPad 4.0 can solve complex road data easily.




BINCE N90 GNSS RTK BASE+ROVER+EXTERNALRADIO PACKING LIST
|
Packing List |
|
|
N90 GNSS Receiver |
x2 |
|
UHF Antenna |
x2 |
|
TRU35 External Radio |
x1 |
|
External High-gain Antenna (HGA) with 5m Antenna Feeder Cable |
x1 |
|
HC2 Controller |
x1 |
|
SurvPad 4.0 Software (Android) |
x1 |
|
Controller Holder |
x1 |
|
Smart Hot-swappable Lithium Battery |
x5 |
|
Dual Slot Charger |
x2 |
|
Power Adapter |
x3 |
|
USB Type C to USB-A Cable |
x1 |
|
5-pin Lemo Cable |
x1 |
|
Measuring Tape 3m |
x2 |
|
Connection Plate |
x2 |
|
Screw Thread Connector |
x1 |
|
External Heavy Duty Power Cable |
x1 |
|
Extension Pole 750px |
x1 |
|
Extension Pole 4625px |
x1 |
|
Carbon Fibre Surveyors Pole 2.5m |
x1 |
|
Heavy Duty Wood Tripod |
x1 |
|
Heavy Duty Aluminium Tripod |
x1 |
|
Hard Carry Case |
x2 |

